and 
NiMH Battery Shield
 | 2 years worldwide warranty | |
 | ||
 | This product has quantity discounts available: | |
| <50 units | USD $81.60 | |
| >=50 units | Contact us for special pricing | |
| >500 units | Contact us for special pricing | |
 | Got any questions? Contact us! - a real human (not AI) will answer in <24 hours! | |
Make your project autonomous with this rechargeable battery pack. This product includes a set of standard AAA rechargeable batteries that you will find in any shop. Simply plug in the batteries and recharge them via the USB-C connector.
- STAT LED (blue): ON when charging, OFF when fully charged or not charging, BLINKING when there is an error.
- LOW LED (red): ON when battery is low and about to switch off.
Good to know:
– Also compatible with Arduino Uno, Duemilanove, Mega, Leonardo and Due – basically any Arduino-pinout-shaped Arduino as only the GND and 5V pins are used.
– USB-C cable is not included, which is needed to charge the battery from your laptop or a wall adapter. If you don’t have you can get here our USB-C Cable.
– There’s currently a known misbehavior on the board, the STAT LED (blue) doesn’t turn OFF after charge is completed, unless you move the switch ON/OFF once after the battery is fully charged. We apologize for the inconvenience.
Includes:
– Battery Shield
– 3x mAh Battery Pack
– Arduino Headers Kit
- Voltage supply via USB: 4.5-5.5V
- Full charging time: 1 hour
- Battery: 3x Nickel Metal Hydride Battery AAA 1.2V 780 mAh
